A sleek, contemporary flame effect fire designed for wall mounting.

·          Remote control giving armchair selection of on/off, heat output and flame effect light levels.

·          Choice of Optiflame® Elite log and Optiflame® white pebbles (both supplied).

·          Finished in black.

·          Fully concealed 2kW fan heater with remote control and manual switching.

·          Choice of 1kW and 2kW heat settings.

·          Flame effect can be used independently of heat source.

·          Wall mounted only (cannot be recessed).

·          Power consumption effect only 140 Watts.

·          Approximate dimensions H605mm x W700mm x D145mm

A contemporary flame effect fire finished in satin silver and grey.

• Remote control giving armchair selection of on/off, heat output and flame effect light levels.
• Choice of Optiflame® Elite log and Optiflame® white pebbles.
• Fully concealed 2kW fan heater with remote and manual switching.
• Choice of 1kW and 2kW heat settings.
• Flame effect can be used independently of heat source.
• Wall mounted only (cannot be recessed).
• Finished in satin silver and grey.
• Power consumption effect only 140 Watts.
• Approximate dimensions 738mm (H) 720mm (W) 145mm (D).

• Contemporary fire designed for use either wall-mounted or recessed so that only the frame protrudes
• Finished in Matt Black
• Remote control
• Optiflame® log effect
• Approximate dimensions 520mm (H) 1200mm (W)  182mm (D)

• A contemporary flame effect fire designed for wall mounting or can be recessed.
• Chassis can also be inset so that only the frame protudes
• Remote control giving armchair selection of on/off, heat output and flame effect light levels
• Silent heating operation
• Optiflame® log effect
• Satin silver effect finish
• Unique “smart” heated glass
• Radiant and convected heat output of 500 Watts 
• Approximate dimensions 640mm (H) 1143mm (W) 146mm (D)

• Contemporary fire designed for use either wall-mounted or recessed
• 2kW fan heater with a choice of 1kW and 2kW heat settings
• Finished in silver grey with a reversible frame finished in gloss black and gloss white
• Remote control
• Thermostat
• Optiflame® log effect 
• Approximate dimensions 625mm (H) 755mm (W) 185mm (D) . Inset 580mm x 580mm x 120mm

• Open fronted contemporary fire with concealed 2kW fan heater
• Flame effect can be used independently of heat
• Fan heater with choice of 1kW and 2kW heat settings
• For use wall-mounted only 
• Thermostat
• Choice of Optiflame® Elite log effect and Optiflame® white pebbles (both supplied)
• Black glass front 
• Dimensions 620mm (H) 700mm (W) 152mm (D)

• The Navarra fire is in a satin silver effect finish. 
• The Navarra can be controlled remotely with a choice of 2 heat settings.
• Wattage 1.5kw.
•  The flame effect works independently of the heat source.
• Can be recessed.
  Dimensions: H550mm x W600mm x D165mm.  Inset H530mm x W550mm x D157mm
   

• The Valencia  is in a chrome effect finish and is an inset fire.
•  The Valencia can be controlled remotely and there’s a choice of 2 heat settings.
• The flame effect works independently of the heat source of 1.5kw. 
•  Can be recessed.
•  Dimensions: H665mm x W700mm x D165mm. Inset H632mm x W648mm x D157mm

• An inset fire that fits standard 18" fireplace openings and all conventional flues.
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows. 115mm needed, or semi-inset using spacer provided.  
• Unique OptiflamePlus® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use
• Brass or Chrome effect trim with black

• Dimensions H615mm W524mm D223mm

• An inset fire that fits standard 18" fireplace openings
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows.
• Unique OptiflamePlus® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use
• Brass effect trim and front 
• Inset depth of only 55mm using spacer provided. 
• Can be flat wall fixed using optional spacer DX28.

• Dimensions H620mm W526mm D235mm

A traditional canopy fire which can be inset or freestanding. Optiflame® Plus effect with brass effect finish and real coals.

• Canopy free fire - no protrusion from the fan heater.
• Remote control giving armchair selection of on/off.
• 1.5kW inset or freestanding fire with unique Optiflame® Plus effect.
• Electronic thermostat control giving highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues.
• Fits flat-to-wall with 70mm spacer (included).
• Flame effect can be used independently of heat source.
• Brass effect.
• Real coals.
• Power consumption effect only 130 Watts.
• Approximate dimensions:

• An inset fire that fits standard 18" fireplace openings
• Chassis allows the fire to be fully inset with minimal projection into the room where flue allows. 55mm needed or semi-inset with spacer provided. 
• Unique OptiflamePlus® effect
• Real coals for added authenticity
• 2kW of heat gently circulated from the fan heater hidden within the canopy
• 1 or 2kW heat output plus thermostat control
• Controls concealed under the canopy, which hinges forward for ease of use 
• Can be flat wall fixed using optional spacer DX28
• Dimensions H620mm W526mm D235mm 

• Fits standard 16" and 18" fireplaces.
• Optiflame coal effect, with real coal, can be operated without heat.
• 2KW fan heater with a choice of 1KW or 2KW settings.
• Inset depth of only 50mm using spacer provided. 
• Can be flat wall fixed using optional spacer DX28 
• H620mm * W520mm * D210mm.

• Inset fire with unique Optiflame® Plus effect
• One piece solid cast metal grate and front
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 115mm needed
• Supplied with both pebbles and coal as standard
• Can be flat wall fixed using optional spacer 2 @ DX28
• Dimensions: 637mm(H) x 521mm(W) x 247mm(D)

• Inset fire with unique Optiflame® Plus effect
• Stainless steel with brass effect trim
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Choice of 1kW or 2kW fan heat settings
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 55mm needed
• Inset depth of only 55mm
• Can be flat wall fixed using two optional spacers DX17   
• Comes with both pebbles and coal
• Dimensions: 620mm(H) x 530mm(W) x 233mm(D)

• Inset fire with unique Optiflame® Plus effect that fits standard 16" and 18" openings. Controls located beneath the canopy. 
• Choice of 1kW or 2kW fan heat settings
• Supplied with both pebbles and coals
• Can be fully recessed. 115mm needed. Semi-inset 55mm with spacer provided.
• Brushed stainless steel finish
• Can be flat wall fixed using two optional spacers DX17   
• Dimensions: 620mm(H) x 520mm(W) x 220mm(D)

• Inset Fire with unique Optiflame® effect with real coals
• Brushed Stainless Steel finish
• Choice of 1kW and 2kW fan heat settings
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Chassis allows the fire to be fully inset where flue allows with minimal projection into room. 115mm needed.
• Supplied with both pebbles and coal
• Inset depth of only 55mm using spacer provided. 
• Can be flat wall fixed using optional spacer DX17   
• Dimensions: 620mm(H) x 510mm(W) x 220mm(D)

A stylish canopy free fire finished in black or silver.

• Canopy free fire - no protrusion from fan heater.
• 1.5kW inset fire with unique Optiflame® Plus effect.
• Electronic thermostatic control giving highly accurate room temperature control.
• Designed to fit 16" and 18" fireplaces and all conventional flues
• Fits flat-to-wall with 70mm spacer (included).
• Black finish.
• Manual or remote control giving armchair selection of on/off.
• Coal and small white pebbles supplied as standard.
• Power consumption effect only 130 Watts
• Approximate dimensions 582mm(H), 519mm(W), 197mm(D)

• Stainless steel effect with chrome effect details
• 2kW fan heater with choice of heat settings
• Thermostat
• Flame effect can be used independently of heat