Wall mounted space heaters for convected and radiated heat. Curtain heaters and plinth heaters.
Sun Prince Infra Red heaters utilise quartz halogen lamps that operate at a very high temperature, converting almost all the electrical energy into short wavelength infra red radiation. They are therefore ideal for heating applications such as garages, warehouses, factories and similar difficult - to - heat situations where convection heating would be impractical. The Sun Prince features ruby coloured lamps as standard and is supplied complete with stainless steel guards and chassis and a steel wall mounting bracket. Sun Prince heaters are silent, generate no fumes or condensation and switch on or off almost instantly. The Sun Prince can be supplied with low glare lamps as an option. Features:
Lamps are made from high temperature resistant quartz glass that must not be handled with bare hands. Lamps last an average of 7,000 hours and are excluded from the guarantee. Heaters may be mounted from the ceiling but must be angled at least 25 degrees from the horizontal to avoid over heating. Allow approximately 100-200W of heating load per square metre.
The Sensation and welcome of instant heat right where it's needed. Sunquartz short wave infra-red heaters warm people, not places. Their uses are endless, from warehouses to churches. These efficient sun-like heaters can penetrate damp air with little waste to the atmosphere. Lightweight and silent, they are easy to install almost anywhere. A cost efficient way to heat large open spaces. Maximum benefit is gained from receiving heat from both sides.
·
Redring's range of wall mountable Ceramic heaters offers a highly efficient, reliable, silent, glare free space heating solution. These heaters incorporate durable ceramic emitters which rapidly convert electrical energy into heat energy without producing any light. There are no fans or other moving components in the heaters so that dust cannot be blown around to contaminate the environment. These heaters have been designed for Industrial and Commercial applications to comply with BS 3456. They are robust with good vibration resistance. All heaters are fitted with guards for personnel protection.
Perfect for use in garages, workshops, offices, store rooms or almost any small commercial situation.
These heaters are designed to provide unobtrusive heating with automatic thermostatic control and multi adjustable mounting bracket all included as standard. With performance tuned for maximum heating effect, these heaters are sure to provide an effective and economical heating solution. This model provides 3kw heating output with built in thermostatic control in a stylish housing that will blend in with its surroundings, whilst the remote control version adds a wall controller over all heater functions and room temperature levels as standard.
New ‘stylish’ heater design with low noise performance.
Designed for wall mounting between 1.8m – 2.3m from floor.
Multi directional wall bracket giving 40° vertical and 120° horizontal adjustment.
Single screw angle adjustment.
Thermostatic control standard on all models.
PFH30R model has a wall remote control supplied as standard, and all models have a thermostat and full heater control.
All models have cool blow ‘air circulation’ setting.
Grey finish.
A range of robust, wall mounted fan heaters suited for general purpose commercial and light industrial use. These models provide fast flexible heating wherever and whenever it is needed. Supplied complete with a wall mounted controller. Multi-directional wall mounting bracket. Included wall remote control over cool blow, half-heat and full-heat settings.
Dimensions: 262mm(h) x 306mm(w) x 495mm(d) (7.6kg)
Max' installed depth: 530mm
A robust, portable fan heater suited for general purpose commercial and light industrial use, providing fast flexible heating wherever and whenever it is needed. The fan heater is supplied with integral controls, a floor stand and handle for individual operation with 3kw output.
Rugged styling with “chunky” go anywhere appearance.
Integral fan and heat setting control.
Integral thermostat.
Durable floor stand & handle.
Cool blow, half heat, full heat.
Corrosion resistant body with durable finish.
Finned/sheathed heating elements with rigid steel outlet grille vanes to direct airflow. Colour: Yellow/Black
The portable model has integral switching over fan only, half and full heat, plus an additional thermostatic control.
Electrical reset cut-out
BFH24T, BFH24TS and BFH24TB. The BFH range has been designed to fit neatly and unobtrusively into fitted furniture, display units, fascias or false walls. These heaters are ideal for incorporating into plinths of kitchen or bedroom base units or shop display units.
BFH24RS, BFH24R and BFH24RB with Remote Control. The BFH range has been designed to fit neatly and unobtrusively into fitted furniture, display units, fascias or false walls. These heaters are ideal for incorporating into plinths of kitchen or bedroom base units or shop display units.
BUH19W, BUH19B, BUH19S. The hydronic BUH range is designed specifically for use on `wet` heating systems. Small and compact, the BUH fits discreetly into the base of kitchens, reception desks, shop counters and even stair risers. The BUH can emit the same heat as a traditional radiator many times its size, but will not occupy valuable wall space. Fan only operation to hot water system. Complete with flexible hoses and isolating valves.
Provides instant heat where space is at a premium and discreet yet effective heating is required. Cleverly concealed in the 'kick space' beneath counters, displays and kitchen units, stairwells and fitted furniture, these heaters are suitable for both commercial and domestic environments. These slimline plinth heaters require a minimum kick-space height of only 100mm thereby offering increased installation options. The range features an on-off kick-switch that Consort pioneered to eliminate stooping.
Our range of Heat tubular heaters are ideal for situations where safe, splash proof, low energy, slim line, heating is required.
A variety of features such as an overheat cut-out switch, low voltage input and an enclosed heating element make for a safe solution to frost protection and condensation prevention. (NB: 1ft=2.54cm)
The IP44 rating allows these units to be installed safely in garages, greenhouses, sheds, workshops, conservatories, bathrooms, caravans and boats. The heaters slim line design makes them discreet and versatile. They can be installed above doorways, below windows, along a floor or on any flat wall surface.
• Overheat safety cut-out
• High quality steel construction
• Low power consumption
• Suitable for Bathroom Zone 2 if wired into mains.
• Complete with 1.8M cable & plug.
• Complete with mounting brackets for wall/floor.
DIMENSIONS:
1FT Dia x Length:
55mm x 305mm
2FT Dia x Length:
55mm x 600mm
3FT Dia x Length:
55mm x 1220mm
4FT Dia x Length:
55mm x 915mm
Colour:
White/Cream
IP Rating:
44
Guarantee Period:
1 Year
FX20V Downflow with pull Cord Operation. This wall mounted fan heater features an energy saving regulator. Neon Indicator. 2kw maximum output. Energy saving thermostat switches output down to 1kW once the room is warm. IP44 rated. L229mm H242mm D109mm
FX20VL. Adjustable thermostat with no pull cord. Neon indicator. 2kW maximum output (1kW output selectable at installation) IP44 rated. L229mm H242mm D109mm
FX20VE Electronic runback timer. Energy saving timer that automatically switches heater off after a preset time period. Adjustable between 5 and 150 minutes. Pull cord operation. Neon indicator. IP44 rated. L229mm H242mm D109mm
The mistral is a 2kw fixed wall mounted fan heater designed to cope with humidity and offering a high degree of splash proof resistance.
Boost Timer
RF thermostatic control
30 Minute boost button
Radio frequency wall-mounted LCD programmer 24hr
Offers 24 hour programming
4 programmable time periods, switching heater between On/Off modes.
Programme advance and manual over ride features
30 minute boost button
Thermostatic control
Back lit LCD screen with power save mode
Ideal for providing extra control to towel rails
Programmes saved in memory for 12 hours in the event of a power failure
Radio frequency wall-mounted LCD programmer 7 Day
Offers 7 day programming
4 programmable time periods for weekdays and weekends, switching heater between On/Off modes
Programmes saved in memory for 12 hours in the event of a power failure Multiple receivers can be controlled by a single controller
DX163 features
Additional receiver for use with RF controllers/programmers (DX162)
Allows an additional ancillary heater Up to 2kW loading to be controlled simultaneously by RF controller / programmer.
