0099 Submersible Pool and Pond Lights

Submersible Pool and Pond Lights

Underwater projector lights. Underwater spot lights and submersible ground lights. LED underwater strip lights. Link to: Waterproof switches, sockets and junction boxes.

!

LED 0.36w Pool Kit. IP68 D30mm Submersible. Kit of 10
15211
!
Ideal for ground, deck or pool. Eight fittings with LED's 0.12w superbrite x 3 LEDs in each fitting. IP44 driver and connector cables, lead and plug supplied. Complete with clips for mounting on decking and 3m cable. Cool running. 50,000 hours. No UV content. Diameter 30mm x Depth 25mm. Cut-out 24mm.

Submersible Low Profile LED Strips 3 metres IP68
15759
!
These IP rated low voltage, super bright LED strips, on a flexible printed circuit board. They are available in a variety of colours and are in 3.0m lengths which can be linked together with solder connections or cut into shorter lengths. There versatility and operating performance makes them ideally suited to a wide range of applications including: signage, under counter lighting, indirect accent decor light, large area back lighting, building contour delineation or substitution for neon lighting. Amperage per 3 metres = 4.05a.
  • Low voltage (12Vdc)
  • IP rated (IP68)
  • Very flexible and lightweight
  • Can be extended using the ribbon cap set (32m max.) or cut shorter (3 LEDs min.)
  • Super bright LEDs. 50,000 hours LED lifetime
  • Power supply required 12.5A or 24A  (Dimensions 50mm x 110mm x 240mm)
  • The RGB version requires a controller 15760
  • Fixing clips available (153.749UK) not supplied
  • Supplied with 2 x end caps

  • A plastic fixing clip for securing the low profile LED strips.

Controller for Low Profile LED Strips 15759
15760
!

An RGB controller for the low profile LED strips. The maximum wattage 12V = 1 - 220W.

  • Housed in a solid plastic case which can be wall mounted
  • Tact switches
  • RGB LED activity indicators
  • 17 modes
  • 256 RGB levels
  • Pause and reset functions
  • On/Off switch
  • Adjustable speed and brightness (8 levels)
  • Dimesions 211mm x 40mm x30mm

LED 1.5w Pool Brick Light - IP68 Submersible. Stainless Steel.
15259
!
1.5w.  5mm LED. 18 LED's  Waterproof IP68. 146mm x 60mm x 61mm Deep. Lumen 45. Stainless Steel with Polycarbonate

LED 3.2w Pool Brick Light - IP68 Submersible. Stainless Steel
15260
!
  • 3.2w.  5mm LED. 39 LED's
  • Waterproof IP68.
  • Tamper proof screws
  • Stainless steel cover with polycarbonate
  • Loop in/out
  • Overall dimesions:196mm x 70mm x 61mm Deep.
  • Cut-out: 190mm x 65mm
  • Lumen 95
  • 12v requires driver for max 15w (4 fittings) IP43. L120mm x W40mm x H19mm

Stainless Steel IP68 1W LED Submersible or Walk-Over Light.
15680
!

·          IP68 Subemersible 1W 316 stainless steel LED marker light. ROHS - Compliant   

·          Screw threaded body with silicon seals and hexagonal lock-nut allows fitting in bath tubs, showertrays, jacuzzi’s, etc (consult a bathroom specialist for professional installation advice)

·         Mounting surface thickness - Min. 2mm, Max 12mm.  Class 3 Equipment.  Suitable for direct mounting on normally flammable surfaces

·         Submersible to a depth of 2m.   Cut Out Dia. 26 mm.   Overerall Dia. 30mm edge to edge mm.  Glass Dia 20 mm.  Recess Depth  26 mm. 

·         NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·         Cool operating temperature. Input Voltage 350mA V

·          Fitted with 1m of cable for connection to a Constant Current LED driver (N.B. to be wired in SERIES)

·          Non-dimmable.  Driver supports up to 9 fittings.

Halogen or LED or Low Energy Stainless Steel IP68 Decklight
15398
!

Diameter 115mm x Depth 90mm. Terminal box included and 1m of silicone rubber cable. Body cast alloy with stainless steel bezel. Lamp GU10 Main halogen or GU10 LED (Not supplied). Low energy version includes 7w GX-53 lamp and colour filters.

LED 1w Walk Over Light IP68 60mm Submersible
15552
!
  • High powered 1 Watt Hi-Power LED
  • Stainless Steel
  • Weatherproof to IP68 Submersible
  • Must be used with LED Driver 
  • 10 fittings can be used with 24v driver (L120mm x W40mm x H19mm)
  • Complete with 3 Metre Rubber Cable
  • Diameter Bezel: 65mm
  • Diameter Cut-out 58mm
  • Depth: 39mm

LED 3w Walk Over Low profile ground light. IP68 Submersible

15054
!

This the most powerful LED ground light from this manufacturer so far, three high power LED's combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with it's robust stainless steel construction, this fitting will remain looking great for years to come. A low profile design and simple wing springs ensure installation is quick and easy.

 

  • Dimensions – Dia 75mm x Depth 43mm. Must be wired in series.
  • Needs driver 15075.
  • Can be used with sleeve 15123.
  • IP Rating: IP68 @ 1bar (9m of water)
  • Material: Stainless steel (316)
  • Beam angle: Flood 50°, Spot 12°
  • LED Output; 3watts @ 350mA
  • Cable: 1m H05RN-F rubber cable

LED 9w LED Walk Over ground light. IP68 Submersible

15056
!

This ground light may look elegant and understated, but it’s light output is greater than a 35w dichroic. The new LED technology contained inside produces more than twice the light output of its competent predecessor, 2150 Lux at 1m. The body is marine grade stainless steel and the glass is toughened 5mm. Also with the added benefit of being IP68 meaning it can be fully submersed.

 

  • Dimensions – Dia 75mm x Depth 97mm.
  • Cable length – 3m. Must be wired in series.
  • Needs driver 15076.
  • Can be used with sleeve 15123. 
  • Input: 700mA driver  
  • IP Rating: IP68 @ 2m
  • LED Output: 9watt Max.
  • LED Beam angle: 45° Flood; 12° Spot
  • Material: Stainless steel 316
  • Cable: 3m 2core cable
  • Glass Temp: 55°C
  • Wiring: Series
  • Hole size: 65mm

LED 3w Walk Over Square ground light. IP68 Submersible.

15057
!

Three power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the fitting will remain looking great for many years to come. A low profile design and simple wing springs ensure installation is quick and easy.

·             Dimensions – 75mm square x Depth 43mm.

·             3m cable length.

·             Needs driver 15075.

·             Can be used with sleeve 15123.

·             Input: 350mA driver

·             IP Rating: IP68@2m

·             LED Output: 3watt @ 350mA

·             LED Beam angle: 45° Flood ; 12° Spot

·             Material : Stainless steel 316

·             Cable: 3m 2core cable

·             Glass Temp: 55°C

·             Wiring: Series

·             Hole size: 65mm 

LED 3w Walk Over Ground light with frosted glass. IP68 Submersible

15058
!

Three power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the fitting will remain looking great for many years to come. A low profile design and simple wing springs ensure installation is quick and easy.

·             Dimensions – 75mm square x Depth 43mm.

·             3m cable length.

·             Needs driver 15075.

·             Can be used with sleeve 15123.

·             Input: 350mA driver

·             IP Rating: IP68 @ 2m

·             LED Output: 3watt

·             Material : Stainless steel 316

·             Cable: 3m 2core cable

·             Glass Temp: 55°C

·             Wiring: Series

  • Hole size: 65mm 

LED 3w RGB Walk Over Ground Light. IP68 Submersible

15059
!

The most powerful LED groundlight from this supplier so far. Three colour change power LED's combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with it's robust stainless steel construction, this fitting will remain looking great for many years to come. A low profile and simple wing springs ensure installation is quick and easy.

  • Dimensions – 75mm x Depth 43mm.
  • 1m cable length.
  • Needs RGBOX part number 15122.
  • Can be used with sleeve 15123.
  • IP Rating:IP68 @ 1bar
  • LED Input: 350mA
  • LED beam angle: 45°
  • LED output: 3watt
  • Material: Stainless steel 316
  • Wiring: Series
  • Cable: 3m 4core cable
  • Cutout: 65mm

LED 6.7w LED Walkover Ground Light. IP68 Submersible
15060
!

Elegance and performance, designed to deliver both. Three powerful LED's provide a strong light, while the special lens creates a classy lighting effect that is easy on the eye. Position along paths, in lobbies or flowerbeds for the professional look.

  • Dimensions – 75mm x Depth 43mm.
  • 1m cable length.
  • Needs RGBOX part number 15122.
  • Can be used with sleeve 15123.
  • IP Rating; IP68 @ 1BAR
  • LED Output: 6.7watt @ 350mA
  • Input: 350mA RGB driver (1 x 15122 x 4 15060 RGB fittings)
  • Material: Stainless steel 316
  • Wiring: Series
  • Glass: Toughened walk over frosted glass
  • Cable: 2 x 3m 4-core 0.75mm
  • Cut out size: 65mm
  • Temperature: 44°C

9 watt RGB LED Ground Light. IP68 Submersible

15061
!

Colour change power LEDs combine to create a strong light output, whilst minimising power consumption. A long maintenance free life is assured, and with its robust stainless steel construction, the 15061 will remain looking great for many years to come. A low profile and simple wing springs ensure installation is quick and easy. Dimensions – 75mm x Depth 97mm. 3m cable length. Need RGBOX part number 15122. Can be used with sleeve 15123.

IP Rating: IP68 @ 2m

Input: 350ma RGB Driver part number 15122

LED Output: 9watt MAX.

LED Beam angle: 45°

Material : Stainless steel 316

Cable: 2 x 3m 4core cable

Glass Temp: 32°C

Wiring: Series

Hole size: 65mm