Mains Voltage Downlights - Fixed, Adjustable and Eyeball in a variety of finishes and styles.

MAINS VOLTAGE - DOWNLIGHTS.

Recessed Downlights. Bathroom and Kitchen Downlights. Halogen Downlights. Intumescent Downlight Covers. Flameguard Downlights(Special prices for multiple mixed quantities, phone 01752-695200).

Energy Saving Mini-Fit Downlight complete with extra mini spiral lamp

LL01

Larger picture

Diameter of fitting: 85mm. Cut-out diameter: 65mm. Depth 135mm maximum. Lamp base:E27 (ES)

GU10 Fixed Flameguard Downlight

LL324

6 Rate = £6.25 12 Rate = £5.85 50 RATE = £5.32

Larger picture

FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Rim dia. 80mm Cut-out. 65mm Recess depth. 90mm.

Fixed Low Energy GU10 Flameguard Downlight

LL344-CF409

6 Rate = £14.01 12 Rate = £13.11 50 Rate = £12.67

Larger picture

This fitting is designed exclusively for use with the low energy compact fluorescent GU10 lamp supplied and cannot be used with standard GZ10/GU10 lamps. It therefore satisfies the requirement of Part L of the 2006 Building Regulations in relation to the installation of energy efficient luminaries. .

Rim dia. 80mm Cut-out. 65mm Recess depth. 90mm.

Mains Professional Cast Recessed Reflector Flameguard Downlighter with moisture seal

LL439

6 Rate = £12.13 12 Rate = £11.35 50 Rate = £10.97

Larger picture

Designed to produce a broad beam of light by means of its extended reflector this fitting enables creative schemes to be produced utilising standard GU10 lamps.

Rim diameter. 105mm, Cut-out diameter. 92mm, Recess depth. 100mm.

Available in Polished brass, polished chrome, satin chrome, white, satin brass and antique brass

GU10 Adjustable Flameguard Downlight

LL325

6 Rate = £6.67 12 Rate = £6.25 50 Rate = £6.04

Larger picture

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Rim Dia. 92mm. Cut-out dia. 80mm. Recess depth. 100mm. Tilt. 15 degrees.

GU10 Adjustable Square Flameguard Downlight

LL30

6 Rate = £13.63 12 Rate = £12.76 50 Rate = £12.33

Larger picture

All FLAMEGUARD downlights supplied complete with 50w GU10 aluminium reflector lamp. Square 102mm. Cut-out dia. 92mm. Recess depth. 100mm. Tilt. 20 degrees.

Energy Saving Slim Profile Compact Fluorescent Downlight - 2 Pin

LL327

This slim profile compact fluorescent fitting provides a discreet, modern, attractive and energy efficient light source. With a recess depth of only 65mm this fitting can be installed in the tightest of spaces. The luminaire is supplied complete with its own control gear which is connected with a simple plug and socket arrangement thus facilitating cleaning and maintenance requirements.

Complete with IP44 rated square bezel and frosted glass for Zone 2 bath or shower rooms

Size = 100mm x 100mm. Cut-out = 92mm x 82mm. Recessed depth 65mm. Lamp 13w G24d 2 pin not supplied

HALOGEN DOWNLIGHT MAINS FIXED

LL122

3 RATE=£2.57 6 RATE=£2.43 10 RATE=£2.16 50 RATE=£2.03

Larger picture

CUT OUT SIZE 65mm. DIA. 80mm. VOID DEPTH 100mm
ENCLOSED TERMINAL BLOCK AND SADDLE BAR SUPPLIED
Pressed steel construction.
Complies with the latest European harmonisation standards EN60598

HALOGEN MAINS DIE CAST FIXED DOWNLIGHT inc LAMP

LL137

3 RATE=£5.69 6 RATE=£5.39 10 RATE=£4.79 50 RATE=£4.19

Larger picture

C/W ENCLOSED TERMINAL BLOCK AND STIRRUP DOUBLE INSULATED
SUPPLIED WITH GU10 50W 50mm ALUMINIUM REFLECTOR LAMP.
CUT OUT SIZE 65mm. DIA. 79mm. VOID DEPTH 115mm.
Pressed steel construction.
Complies with the latest European harmonisation standards EN60598

GU10 Flush Mounted Fixed Downlight Inc lamp

LL447

Larger picture

Pressed steel

Electrophoretic powder coating

Ceramic lampholder

Covered terminal block

Supplied with 50w lamp

Wide colour choice

Lamp removal tool

Dimensions: Dia 82mm, Cut out 65mm, Recessed depth 80mm.

ENERGY SAVING DOWNLIGHT FIXED GU10

LL19-CF005

For every six fittings we will supply 1 @ 11w Energy Saving lamp FREE

Larger picture

This fitting is designed exclusively for use with the low energy compact fluorescent Warm white 7W or 9w GU10 lamp (our B46) and cannot be used with standard GZ10/GU10 lamps.
It therefore satisfies the requirement of Part L of the 2002 Building Regulations in relation to the installation of energy efficient luminaries. .
CUT OUT SIZE 64mm. DIA. 80mm. RECESSED VOID DEPTH 95mm
ENCLOSED TERMINAL BLOCK AND SADDLE BAR SUPPLIED

HALOGEN DOWNLIGHT MAINS ADJUSTABLE

LL123

For every six fittings we will supply 1 FREE

Larger picture

CEILING CUT OUT SIZE 90mm. DIA. 104mm. VOID DEPTH 100mm
ENCLOSED TERMINAL BLOCK AND SADDLE BAR SUPPLIED
Adjustable tilt angle 30 degrees
Pressed steel construction.
Complies with the latest European harmonisation standards EN60598

HALOGEN DIE CAST ADJUSTABLE DOWNLIGHT inc LAMP

LL138

3 RATE=£7.34 6 RATE=£6.96 10 RATE=£6.18 50 RATE=£5.41

Larger picture

C/W ENCLOSED TERMINAL BLOCK AND STIRRUP DOUBLE INSULATED
GU10 50W 50mm REFLECTOR LAMP.
CUT OUT SIZE 75mm. DIA. 85mm. VOID DEPTH 115mm.
Complies with the latest European harmonisation standards EN60598

GU10 Flush Mounted Adjustable Downlight Inc lamp

LL448

Larger picture

Pressed steel

Electrophoretic powder coating

Ceramic lampholder

Covered terminal block

Supplied with 50w lamp

Wide colour choice

Lamp removal tool

Dimensions: Dia 92mm, Cut out 82mm, Recessed depth 80mm, 15 degree tilt.

Cast Aluminium IP65 Recessed LED Wall Light

LL173

Larger picture

Cut Out Dia. 112 mm. Overall Dia. 126 mm. Base Dia. 122 mm. Recess Depth. 70 mm. Input. Suitable for direct mounting on normally flammable surfaces.

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate driver required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·          Cool operating temperature

·          White, Blue, Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

·          Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cast Aluminium IP65 Recessed LED Wall Light

LL201

Larger picture

Cut Out Dia. 112 mm. Base Dia 122 mm. Recess Depth 70 mm. width 126 mm. Height 126 mm. Double Insulated. Suitable for direct mounting on normally flammable surfaces.

· IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

· Integrated LED driver - no separate driver required

· Satin silver cast aluminium faceplate

· NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

· Cool operating temperature

· White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

· Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

· Non-dimmable

· N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cast Aluminium IP65 Recessed LED Wall Light

LL228

Larger picture

Cut Out Dia. 77 x 117 mm. Base Dimensions 140H x 95W mm. Recess Depth 100 mm. Width 90 mm. Height 135 mm. Double Insulated. Suitable for direct mounting on normally flammable surfaces

· IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

· Integrated LED driver - no separate driver required

· Satin silver cast aluminium faceplate

· NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

· Cool operating temperature

· White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

· Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

· Non-dimmable

· N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Cast Aluminium IP65 Recessed LED Wall Light

LL407

Larger picture

Cut Out Dia. 120 x 122 mm. Base Dimensions 140H x 140W mm. Recess Depth 100 mm. Width 135 mm. Height 135 mm. Double Insulated. Suitable for direct mounting on normally flammable surfaces

· IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

· Integrated LED driver - no separate controller required

· Satin silver cast aluminium faceplate

· NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

· Cool operating temperature

· White, Blue,Green and Red LED versions available (Due to the nature of LED's a slight colour variation from lamp to lamp is possible)

· Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

· Non-dimmable

· N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

Aluminium IP65 Eyelid LED Recessed Wall Light

LL457

Cut Out Dia:70 mm. Overall Dia:73 mm. Base Dia:69 mm. Recess Depth:60 mm. Projection:28 mm. Must be earthed. Suitable for direct mounting on normally flammable surfaces.

· IP65 Mains voltage LED step light suitable for step and low level lighting

· Integrated LED driver - no separate driver required

· Aluminium body

· Fitted with 30cm mains cable